Product prices and availability are accurate as of 2022-09-28 02:10:34 BST and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Description of Copper Moonshine Parrot Kit from Clawhammer Supply
moonshinestuff.com are delighted to stock the excellent Copper Moonshine Parrot Kit.
With so many on offer these days, it is good to have a name you can trust. The Copper Moonshine Parrot Kit is certainly that and will be a great purchase.
For this price, the Copper Moonshine Parrot Kit comes highly recommended and is always a regular choice with many people. Clawhammer Supply have included some excellent touches and this equals great value for money.
Copper Moonshine Parrot Kit - 100% copper. Step-by-step online assembly video instructions. Machine cut parts, perfectly sized and pre-drilled Insert your proofing hydrometer into the parrot and easily monitor the proof of your run, in real time, as you are distilling. This is the easiest, most convenient, and most reliable way to monitor and measure alcohol proof during a distillation run. Using a proofing hydrometer and this parrot, you will be able to measure the alcohol percentage of fuel alcohol, whiskey, moonshine, etc., very easily. With this kit, we supply all of the copper fittings needed to make a high quality, 100% copper parrot. You will need to supply a piece of wood for the base of the finished parrot. You will also need to drill an 11/16" hole into the piece of wood* to support the finished parrot. The kit includes: All required pipe and fittings to make a copper parrot Step-by-step online assembly videos, located on the manufactures website What you need to have or buy from Home Depot: A plumbing torch or large electric soldering iron A small spool of lead free plumbing solder and small container of water soluble flux Locking pliers Sandpaper A small work table A vise would be handy, but is not absolutely necessary 11/16" drill bit Block of wood for the base * Wood Block Not Included. You need to drill a 11/16" hole into your wooden base to support the finished parrot. Note: We do not sell to North Carolina residents.